HEATSTRIP 2000W, 240V, Nano Radiant wall mounted heater - THN2000

Heatstrip nano radiant electric wall mounted heater. Model THN2000, 2000Watts The new entry level HEATSTRIP® Nano wall /ceiling mounted electric infrared heater is an ideal spot heating solution for many indoor and outdoor heating applications with the convenience of heat output and timer control, operation is so simple. The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range. For the majority of outdoor applications the most effective method is to spot heat a table or similar area. The below diagrams provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. Selections are based on HEATSTRIP® Nano being mounted at 2.4m from the floor in an undercover fully enclosed outdoor area.
Mounting options- The installation of HEATSTRIP® Nano is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to below diagrams). The HEATSTRIP® Nano can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrella’s; mounted end-to-end, or 2 units together.
Mounting height:

• Minimum mounting height 1.8m
• Ideal mounting height 2.1m – 2.3m
• Maximum mounting height 2.5 outdoors / 2.7 indoors